Описание

The fine mist nozzles are made of brass body, the liquid forms a centrifugal vortex in the vanes, spray tiny open-core type particles from the jet hole, can be widely used in factory humidification, cooling, disinfection, dust falling, Landscaping, salt fog test, and other artificial fog. The nozzle use American precision punching device, the opening about 0.3mm, well done, compare the use cost and gas humidification, able to save more than 10 times.
This series of nozzles does not require air support, the system is simple, spray a fine mist, adequate atomization, has the advantages of energy saving, water saving, low cost and good effect; Stainless steel spray sheet is processed by advanced forging technique, strong durability, the life is over 2.5 times compared with similar products.
The nozzle can be completely atomised by the pressure of the tap water, and the effect of using the high pressure water pump is better.
Installation steps:
1. It is recommended that the humidification system be installed at a height of 2.5m-3m.
2. Connect the adapter to the tap.
3. Turn on the faucet and wash the system for 1 minute and remove the impurities.
4. Screw the spray nozzle on the tee, except for the end.
5. Turn off the faucet and clean system for 2 minutes to make sure the system is completely cleaned.
6. Close the faucet and install the last nozzle to the joint and use the end cap.
7. Fix the misting hose through a cable belt seat clamp.
8. Turn on the faucet until the sprayer works and enjoy the cooling humidification system.
9. If no need to use the humidifying system for long time, close the nozzle and keep it dry and clean.
Material:Plastic + brass
colour:black
Package Contents:
6 * 3/4 inch female threaded faucet connector
8 * clip
1 * large connector
1 * 6 m hose
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
This series of nozzles does not require air support, the system is simple, spray a fine mist, adequate atomization, has the advantages of energy saving, water saving, low cost and good effect; Stainless steel spray sheet is processed by advanced forging technique, strong durability, the life is over 2.5 times compared with similar products.
The nozzle can be completely atomised by the pressure of the tap water, and the effect of using the high pressure water pump is better.
Installation steps:
1. It is recommended that the humidification system be installed at a height of 2.5m-3m.
2. Connect the adapter to the tap.
3. Turn on the faucet and wash the system for 1 minute and remove the impurities.
4. Screw the spray nozzle on the tee, except for the end.
5. Turn off the faucet and clean system for 2 minutes to make sure the system is completely cleaned.
6. Close the faucet and install the last nozzle to the joint and use the end cap.
7. Fix the misting hose through a cable belt seat clamp.
8. Turn on the faucet until the sprayer works and enjoy the cooling humidification system.
9. If no need to use the humidifying system for long time, close the nozzle and keep it dry and clean.
Material:Plastic + brass
colour:black
Package Contents:
6 * 3/4 inch female threaded faucet connector
8 * clip
1 * large connector
1 * 6 m hose
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

|

ВсеМы можем отправить товар в течение 5-8 дней недели, обычно мыВ соответствии с временем заказа клиента для упаковки и доставки, нам нужноВнимательно проверьте качество товара перед отправкой, так что возьмитеВремени, чтобы справиться с этим. Время доставки: Из-заДля форс-мажорных факторов: ураганов, дождевых штормов влияет на полеты. ВедущийДля того чтобы логистика задержки. Мы честные продавцы, не дадим вам страдатьПотери. Пожалуйста, дайте логистической компании немного времени обработки, мыПодождите, пока посылка достигнет вашей стороны. Если ваша Логистическая информация прибывает в местное почтовое отделение: В том случае, еслиМестное почтовое отделение не связывается с вами, пожалуйста, свяжитесь с вамиМестное почтовое отделение как можно скорее, чтобы получить ваш пакет. В противном случаеСверхурочное получение посылок, местный почтовый отдел вернет вашПосылка, воздействие самоответственности. Время защиты истекает: В тех случаях, когдаМы закончили время доставки, если период защиты продуктаВыйдите, пожалуйста, продлите период защиты продукта самостоятельно илиСвяжитесь с нами, пожалуйста, не открывайте спор напрямую. Ввозные таможенные пошлины: НалогиИ сборы не включены в стоимость товара или стоимость доставки.Эти расходы являются ответственностью покупателя. Импортные пошлины, налоги иРасходы не включены в стоимость товара или стоимость доставки. ЭтиРасходы являются ответственностью покупателя




Если товар поврежден, мы должны связаться в течение 24 часов с момента получения.
Если данный товар находится в вашем распоряжении более 7 дней, он считается пользованным товаром, и мы не производим возврат или замену. В том случае, еслиВы не удовлетворены получением товара (неправильный, поврежденный,Дефект или товар не соответствует описанию), пожалуйста, верните его в течение 7 дней дляЗамена или возврат денег.Для любогоПерсональные причины (выберите не нравится или мне не нужно этот продуктБольше), возврат отправка, зарядное устройство будет товаров возлагается на покупателя. МыНе будет принимать какие-либо вещи с запахами (духи. Дым, и т. Д.)
ВсеВозвращенные товары должны быть в оригинальной упаковке, и вы должны предоставитьМы с номером отслеживания доставки, конкретной причиной возврата,И идентификатор вашего заказа.Характеристики
- Номер модели
- Watering Kits System
- Материал
- Пластик
- Тип распылителя
- Other












